Most inflatable paddleboards out there come with a convenient little hand pump. Most of the time, these hand sup pumps are high-pressure which enables you to pump up your paddleboard within 10 minutes. That’s not an issue for most people with an inflatable paddle board. After all, what are a 10 minutes warm-up every time and again?
Ten minutes might not sound like much time and effort for somebody who takes on paddle boarding for recreational use. However, for an avid paddler, that seems like a lot of time. As a paddler, you truly want nothing to stand between you and the water. Pumping up your board for 10 minutes every time you want to take on the waves might just become a little bit of a challenge. Thus, electric SUP pump will take the spot for faster air pumping.
A magical little invention indeed, an electric pump is the solution to all your problems as an inflatable paddle boarder. Most avid participants in this sports plan to paddle as often as possible. This means that they will have to deflate their paddle board in between sessions for easier transportation and then re-inflate it the day before a couple of hours later with little or no effort at all. The answer here is the electric SUP pump, but which one?
Well, we took it upon ourselves to check on the number of options to review the best electric inflatable SUP pump in the market today. So, any inflatable sup electric pump that you will choose in this list will surely not disappoint.
Best SUP Electric Pump Reviews
- (Stage 1) Low pressure/high volume turbine blower
- (Stage 2) High pressure piston for higher PSI.
- For products with high air volume requirements. Inflates up to 14.5 psi in minutes
The Bravo BTP 12 is nothing far from what the name stands for as it is indeed one of the best electric SUP pumps you can lay hands on as of now.
The engineering of this sup pump is so well done that only a few if any SUP electric pumps can match up to its performance. If you’re looking for speed, then the Bravo BTP 12 will get the job done within approximately 2 minutes, depending on the size of the board.
The SUP air pump will not plug into wall outlets, but the 12-volt battery should be more than enough and practical since it isn’t often that you find electrical outlets by the beach or lake.
If you are worried that the SUP pump might not match your board’s valve, then you are in luck because the Bravo BTP 12 comes with a standard valve adapter which provides various attachment options that will fit many inflatable paddleboards. Hence, this makes the Bravo BTP 12 Two-Stage Electric Turbo Pump compatible with pretty much any other inflatable toys in the market and not just strictly an iSUP pump.
The battery-powered sup pump functions in 2 stages. The first stage is a low-pressure, high turbine blower which will pump in the first few PSIs quickly. Then, the pump moves to the second stage which will take a little longer and sound a little louder. Most importantly, note that the pump is capable of inflating up to 15 PSI in minutes and that’s exactly what we’re looking for.
A nice little feature on the Bravo BTP 12 Two-Stage Electric Turbo Pump is that you can set it to an automatic shut down once it reaches a specific PSI which is very useful. This way, you don’t have to stand by the board and watch over it as it inflates with your hand on the trigger, so it doesn’t pop. Obviously, The BTP’s Automatic shut-off works every time, and you will get the exact air pressure. So, enjoy it.
If you think that’s all there is to the Bravo BTP 12 Two-Stage Electric Turbo Pump then note that the pump comes in 2 options: it can either be powered via alligator clips in your car or by battery as mentioned earlier. Most often, you’ll find out that it’s more practical to power the SUP pump using your car because you’ll always forget to buy an extra battery. In both cases, the pump is made to get you through any situation, and that’s another excellent point for the Bravo BTP-12 Turbo.
- The pump comes with a bag
- The hose measures 6 feet (must be held down sometimes)
- Airtight, Permanently Sealed SUP Valve Adapter and Hose for Trouble-Free Inflation, new for 2019
- Two Stage High-Pressure, High-Speed, Inflates up to 14.5 psi in just a few minutes. Max Draw 20 Amps
- Portable, lightweight, weighs 6 lbs. Dimensions: 12" x 4" x 6". Hose 72” (6’) Long. Includes: 102” cable...
Perhaps you’ve already tried an iSUP electric pump, but there is hardly a chance that you have run into something like the Bravo BP12. This is one of the most efficient electric pumps on the market today, and a large part of that legacy is credited to performance speed.
Obviously, if you’re using your inflatable SUP regularly, then the last thing you would want is to sit there and wait for long while staring at the water. It must have been one of the most impatient moments of my life to wait for my board to inflate and even worse when I had to pump it manually. However, this is not the case with the Bravo BP12 SUP air pump that’s not about to get through the pump at hand.
One thing which concerns most paddlers out there is buying an electric SUP pump that is not compatible with their board’s valve. The Bravo BP12 comes with a common valve adapter that can be used on different valve types and inflatable sups board models. This is a practical solution because the SUP inflatable pump will be compatible with many inflatable objects saving you time and money.
Unlike the previously reviewed pump, the BP12 proceeds to pump your board in one stage and not two. The inflatable sups pump features a high-pressure function which lasts until your board is fully inflated. The high pressure of the pump gets the job done in less time and with less noise. This is a great advantage for paddlers since they will spend less time waiting and more time paddling in the water.
The Bravo BP12 also has the practical automatic shut-off option once it has reached your designated PSI. Thus, all you have to do is set it up and get something else done while your board automatically inflates to the right air pressure. This is something which can never be achieved using a traditional hand pump. Perhaps, this might just be the best electric pump for paddle boards.
Similar to most electric SUP pumps, this model also comes with two power options which will save you a lot of hassle. Indeed, the Bravo BP12 features a 12 Volt battery option, but it also comes with alligator clips for your car. This is one option which will come in extremely handy in the long run, and you’ll most likely end up using the alligator clips a lot more than you would imagine.
- It inflates from 1 to 15 PSI in minutes, depending on the size of your board.
- Comes with a bag.
- Barely weighs 3 lbs.
- The hose is 6 inches long.
- A portable, high-pressure electric pump for inflating stand up paddle boards.
- Includes a flexible, non-kinking hose with H3 nozzle.
- Includes 12-V cigarette lighter plug-in, or optional 12-V battery cables.
Tower Paddle Boards is one of the very few inflatable paddle board brands which actually manufactures its SUP electric pump and rightfully so. The SUP pump is a very reliable model as proven by its meticulous engineering and exhibited through performance speed.
The Tower Paddle is one of the best electric SUP pumps because it is setting an example for most paddleboard companies out there to begin the initiative of hooking up their inflatable paddle boards with electric pumps instead of the traditional hand pump which takes longer and requires a lot more effort.
The best part about the Tower Paddle Boards Electric SUP Pump is that it’s a lot less noisy, but the downside is, it’s only compatible with boards made by Tower. In addition to a few other inflatable SUPs on the market, the hose of this pump might not be a match for your board. Hence, if you cherish quality and want to get yourself this exact pump, then you might want to consider getting your hands on a valve adapter.
The Tower paddle Boards pumps have a single stage function meaning it will pump compressed air in a single stroke and in a faster way. The high-pressure operation will produce some noise but the sup board pump will inflate the board in just a few minutes.
As the manufacturer puts it, this sup pump will enable you to set it and forget both for inflation and deflation which is a common and a very useful feature.
You can thus easily set up your pump to a specific PSI (regularly 15 PSI) and allow the pump to do the rest as you get yourself ready and do some stand-up paddleboarding. The pump will automatically shut off after reaching its designated degree and you don’t even have to monitor it as it goes.
There is no surprise here when it comes to power because just like every SUP electric pump out there, this one also comes with a battery lot of 12 V and alligator clips. You might start to notice a pattern here, and that is because most people will end up altering to the alligator clips because they’re simply less demanding and they get the job done easily. Also, you don’t have to worry about getting batteries every time.
- The pump weighs 3 lbs
- H3 nozzle on the pump hose
- Built-in pressure gauge
- Inflate with the engine running to reduce inflate time
- PORTABLE AND POWERFUL High-pressure pump for inflating stand up paddle boards, inflates up to 20 psi for rigid SUP...
- INCLUDES Carrying bag, 12-V cigarette lighter plug-in, optional 12-V battery cables and flexible, non-kinking hose with...
- EASY TO USE Adjustable auto-shutoff stops the pump once a selected pressure is reached
Again, another inflatable paddle board company which sought the logical step of designing its own proper electric SUP pump. It is about time that iSUP manufacturers started to build their electric pumps as it is one of the essential items of any iSUP package. Sadly, however, we are yet to reach the time when electric SUP pumps will be included in the actual package. So, until then, feel free to discover the high-performance NIXY electric sup pump.
If you’re looking for speed and performance, then you probably shouldn’t look any further as this pump perfectly fuses the 2, making one of your best options on the market. However, let’s take a look at the other areas of the pump to determine just how good it can be.
Well, this is primarily a NIXY electric sup pump thus. it is only compatible with NIXY boards and inflatables. Yes, that is one thing that should be emphasized here because this pump is designed primarily for the users of NIXY paddle boards. Nevertheless, if you want this exact pump because of the many positive reviews it has received, then you can easily get your hands on a valve adapter which will necessarily fit your iSUP’s valve.
After a couple single stage electric Sup pump, we are back to a 2 stages pump, and it comes as no surprise either because it is very practical. Not to worry about the details, the NIXY pump functions under low pressure through the first stage to get it going and then switches to a high-pressure blow after the first few PSIs. This operation will take a few minutes to fully inflate your board no matter the size. (this applies to inflation and deflation)
Forget about putting effort using a hand pump, the NIXY pump because this product can be easily set up and operated to inflate the board automatically to a specific PSI where it will also shut-off automatically. This neat little feature will enable you to put your board on and get ready to hit the water instead of laboring to get it from 1 to15 PSI every time. (This process functions for both inflation and deflation)
Well, it’s far beyond surprise right now that the NIXY electric SUP pump also features a 12 V battery slot. The battery itself is pretty useful and will enable you to take the pump anywhere you wish without any limitation, but it is limited when it comes to power. Hence, NIXY thought it would be better to also hook you up with alligator clips which will enable you to power the pump using your vehicle’s battery, saving you a lot of hassle.
- The pump weighs 6 lbs.
- The hose measure 6 feet.
- It takes around 10 minutes to inflate the board fully.
- This is by far one of the best electric sup pumps for big boards.
- 6ft Air hose fits Halkey Roberts valve types
- 9ft Long battery cable with alligator clips
- The pump stops automatically when the selected PSI on the analog dial is reached
Newport’s Vessels is one of the most prominent brands in the industry of inflatables. They’re one of the few brands which managed to pull through the surface through producing and promoting quality electric pumps, and that is why it is on this list today.
Besides the historical momentum, Newport Vessels is also known for being an extremely efficient electric pump which is capable of accomplishing difficult tasks in the least amount of time possible which makes them great for paddle boarders. As an iSUP owner, all I want is to be able to inflate my SUP and get into the water quickly, and this electric pump will enable to do just that in no time.
Before making a purchase, you must make sure that the pump features a hose that is compatible with your board’s valve. Fortunately for you, this is not something you should worry about when getting your hands on this pump because it comes with an all Halkey Robert check valve fittings, making it compatible with pretty much every iSUP on the market today.
When it comes to functionality, there couldn’t be anything simpler to use than this pump. No need for a 2 stages operation because the Newport Vessels can get the job done in one smooth stage. All you need to do is hook the hose up to the board’s valve and allow the machine to get your board from a wrap to a full on extended board and all this in a matter of minutes. All in high-pressure mode, you will be able to attend full inflation within 10 minutes, depending on the size of the board.
Truly, an automatic shut-off this is one of the most practical features on the Newport Vessels, and it is one which will make it a lot easier for you to get things done while the board is inflating. All you need to do is select a specific PSI using the PSI selector and let the machine do its work while you get yourself ready get yourself ready for the ride because the pump will go off the moment it hits the designated PSI.
It comes as no surprise that this pump too, runs on a 12 V battery which is commonly found in most utility stores but it is pretty impressive that the pump can reach up to a 15 PSI ceiling before it begins to struggle which is a point that no inflatable paddle board can reach. The pump does not include alligator cables which might be a little bit of a disadvantage for the Newport.
- The pump comes with a bag
- The battery has a 9 feet long cable
- The hose measures around 6 feet
- Seamax SUP20D PRO Signature Edition air pump is an upgraded version in our SUP pumps family. Programmed intelligent...
- 1st stage max speed 350L/min; 2nd stage max speed 70L/min, Pressure setting increments 0.5 PSI and support up to 20PSI....
- Built-in sand filter for air intake & pump cooling system; Built-in outtake chamber for noise reduce and better...
Seamax is an electric SUP pump that is specifically designed for inflatable paddle boards. This makes a great difference because there is a set of qualities which set iSUPs apart from any other inflatable object and that can be summed up in quality of build and material.
The Seamax is thus a solid pick for you if you happen to own an inflatable paddle board that you wish didn’t take so much effort to inflate. Indeed, it is one of the most challenging tasks to accomplish for any paddler out there, and this product might just be your saving grace.
When it comes to the Seamax, it is quite necessary for it to be compatible with most iSUPs on the market because after all, it is an iSUP pump. Hence, the Seamax comes with an H3 valve adapter which is fitting for most inflatable paddle boards. Nevertheless, if your board happens to have a different valve then fear not because there is nothing that a cheap valve adapter can’t solve.
When it comes to functionality procedure, the airSUP happens to harbor a two stages engine which separates the operation into 2 main stages. During the first stage, the pump will slowly ignite on a low-pressure blow which will get the board through its first PSIs. Then, the pump will proceed to the second stage which is a high-pressure blow that will carry on the rest of the pumping faster and more efficiently. This operation tends to be a little noisy. So, try not to think about it. Also, that this is one of the few electric pumps out there which is capable of reaching a maximum pressure of 20 PSI.
Just like most electric pumps on the market, the primary pump has an automatic shutoff feature. Indeed, with the airSUP, you can also set up the gauge to a specific PSI and let it get the job done while you busy yourself dressing for the journey or simply getting something else done than watching over the pump. This is a neat little feature which will make your life a lot easier, and that is something only inflatable SUP owners will appreciate. (Works for both inflation and deflation)
When it comes to powering this little pump, it comes as no surprise that it also runs on a 12 V battery. However, what might be the best little feature ever is the fact that it can also function through your car’s cigarette lighter socket. Yes, you heard that right, this pump can plug into your cigarette socket and function just as good if not better which makes it pretty much unique.
- Can pump up a 10 feet long board in under eight mins.
- Powered by car cigarette socket.
- No messy cables.
- Faster pump.
- Great for stand up paddleboards, boats, and any inflatable with drop stitch that requires high pressure
- Two stage high pressure inflation/deflation
- Car light style plug included
And we are back to one of the most prominent inflatable paddle board brands in the industry. Needless to say that this brand also features its electric pump which is quite a delight for Airhead owners. Indeed, if you happen to own an Airhead, then this is one of the most necessary purchases you have to make. However, even if you own a different brand, then this is still a pretty viable option.
The airhead is an electric pump for paddle boards which is known for its quality of build and reliability which are two main features that every electric pump needs. However, will it be able to hold up to its competition? Let’s find out.
One of the biggest concerns for iSUP owners is to get an electric pump which is not compatible with their board. However, that should not be one of your concerns as an Airhead owner because this inflatable sup pump is simply compatible with every airhead out there. Also, even for those of you who happen to own a different brand, the product comes with an interchangeable H-valve and Boston valve adapters which makes this pump compatible with pretty much every inflatable SUP out there.
When it comes to basic functions, there is no question that this is one of your best options out there. However, it is necessary to note that this pump separates labor into two stages. Through the first stage, the pump will function under low pressure and get your board through the first PSIs. However, once at the second stage, the pump will go full pressure mode and completely inflate the board in under eight mins. For boards that measure over 10 feet in length, it shouldn’t take over 10 minutes.
There are quite a few questions which arise when making a purchase, but the one which is a requirement is whether it is an automated pump or not because it makes all the difference. All you need to do when dealing with this pump is set up the designated PSI to which you regularly inflate your boar and walk away. Yes, just walk away and let the pump get a job done. You can get yourself ready or tidy up while the board is pumping as it will automatically shut off once it reaches the designated PSI safely.
There should be no shortcoming here because the pump at hand also uses a 12 V battery which will get the pump to a 20 PSI of performance. This is indeed a requirement for those of you who own large boards because sometimes 15 PSI is just not enough. The pump can also operate using alligator cables which will prove to be quite useful in the long run, and you’ll learn to appreciate it, even more, when you that, you forgot to buy batteries.
- The pump weighs 4.5 lbs
- The color is yellow black
- The hose is 6 feet long
- The pump can operate using the car’s cigarette socket
- 12V portable air pump is great to keep on a boat or in the car
- High-pressure pump inflates up to 15 psi for rigid SUP boards
- Adjustable auto-shutoff stops the pump once the selected pressure is reached
If you’re looking for an electric air pump for inflatables, then you have just found your match. The Sevylor electric pump is one of the company’s biggest investments as it is a long time requested item with the ability to relieve most of your stress about paddle boarding.
Indeed, as an avid paddle boarder, the electric pump will make your life easier because it is capable of simply and quickly inflate your iSUP and SUP pump installation in a matter of minutes. However, is it your best options on the market? Let’s find out.
One of the biggest and logical concerns which come on to upon purchasing an electric pump is if it’s compatible with your board’s valve. Indeed, there’s nothing more irritating than getting the wrong size when you order something online which is often ten times worse when that happens with your electric pump. Nevertheless, worry not because the Sevylor SUP electric pump comes with adaptors for a double lock, mini double lock, Boston and pinch valves.
That being said, it’s as if you’ve been granted the key to every door. Hence, it doesn’t matter what board you own because this electric Sup pump is compatible with most if not all of them.
When it comes to functionality, it shouldn’t come as a surprise that this machine can blow some steam. Indeed, the Sevylor is a powerful electric Sup pump which is capable of producing high-pressure inflation that will completely inflate 10 feet long boards in under 8 minutes.
Obviously, the Sevylor also has a built-in automated system which will enable you to set up the pump to a certain PSI and let it do the job for you. This right here is one of the few features which I can appreciate because I can use that time to get suited and ready for my little adventure instead of standing by and supervising the machine. Undoubtedly, the Sevylor does shut off once it has reached its designated PSI and that is simply epic.
When it comes to power, the Sevylor is not far too different from its rivals as it too harbors a slot for a 12 V battery which is only a requirement if you don’t own a vehicle. Yes, you can use your vehicle to power this electric Sup pump using nothing but your car’s cigarette socket and watch the magic happen.
- The pump comes with a heavy-duty extension hose which is unbreakable.
- It also comes with a low-pressure extension hose.
- The pump weighs around 3.5 lbs.
- This might just be the best air pump for inflatables.
Last update on 2021-06-14 at 11:33 / Affiliate links / Images from Amazon Product Advertising API